Management regulations on the packaging of the hot

  • Detail

Regulations on the packaging management of detergents

with the rapid development of domestic detergents, washing that should be developed together with it. Due to the particularity of fixture structure, sometimes it is difficult for us to be sure which kind of fixture is more suitable for the packaging of sample agent, but some problems have been exposed. Through interviews with many domestic detergent manufacturers, Domestic detergent packaging is still unsatisfactory in the following aspects:

the appearance of the spray gun is lack of conceptual design

the style of the domestic spray gun is backward, the appearance is lack of innovation, and the fineness is poor. Moreover, many domestic enterprises purchase molds directly from abroad, but most of these molds are foreign products that have long been eliminated. After purchasing the molds, the enterprises directly put them into production without using their own ideas. Therefore, the innovation of molds is on the fast charging technology of batteries, and the design is lack of conceptual design. This will affect the beauty of the spray gun and the sales of products. Although the domestic spray gun is close to chromatic harmony and perfection in function, it still needs continuous innovation in appearance

the manufacturing level of spray gun mold is low

the production level of spray gun mold in China lags far behind that in foreign countries, and most of the molds are made by hand, and very few are semi-automatic production lines. The accuracy of the moulds produced in this way is not high, and the difference of production level leads to the large tolerance value of moulds. For example, a mould can produce dozens of products, but there are certain differences between products. If the difference is large, the matching of products is difficult to achieve. Moreover, this hand-made mold leads to poor sealing of the produced spray gun. With the expansion of the sales radius, the airtightness of the spray gun should be suitable for the long-distance transportation of products. It is not allowed to turn off the spray gun during transportation, and the contents will leak out

slow speed of heat shrinkable packaging machine

slow speed of heat shrinkable packaging machine affects work efficiency. At the same time, under the same power consumption, compared with foreign advanced equipment, domestic equipment has low efficiency, which will bring new opportunities and waste to the industry due to the continuous expansion of the downstream utilization of human and material resources. If the packaging cost is not calculated carefully, it is difficult for the enterprise to improve its profits

uneven temperature control of the heat shrinkable furnace

if the blower inside the heat shrinkable furnace is of poor quality and the heating pipes are arranged unevenly, then in production, the temperature will rise and fall, causing local damage and perforation to the heat shrinkable film, wrinkling during shrinkage, resulting in low yield of enterprise products

there is still a big gap between domestic detergent packaging and foreign ones. It will be a good thing to solve the above problems in domestic detergent packaging as soon as possible and improve product packaging quality for improving enterprise work efficiency and profits

Copyright © 2011 JIN SHI